Carbon Push Fit pole kits
Lightweight carbon pole sections with a simple push fit connection system, supplied with two Kevlar insulated sections for use at the operator end.
View push fit pole optionsKevlar Gutter Pole Safety Certification
Professional gutter pole safety
Safer reach.
Tested protection.
Included as standard.
Our Carbon Push Fit and Carbon Clamp Fit gutter vacuum pole kits include two Kevlar insulated lower sections as standard. They are positioned at the operator end of the pole system, where the equipment is held, controlled and handled during use.
Independently tested at 35 kV
Report STD526000272 is available to view in full below.
35,000 volts
Power frequency test voltage
0.0 mA
Recorded leakage current
1 minute
Laboratory test duration
PASS
Final recorded result
Protection where it matters
Two Kevlar insulated operating sections included as standard
When you purchase a qualifying Carbon Push Fit or Carbon Clamp Fit gutter vacuum pole kit from Equip2clean, two Kevlar protected lower sections are supplied as part of the system. They are fitted at the bottom, operator controlled end of the assembled pole.
Carbon Clamp Fit pole kits
Professional carbon pole sections with secure clamp connections, supplied with two Kevlar insulated sections at the principal handling end.
View clamp fit pole options2
Operator end protection
Positioned at the bottom of the pole assembly
The Kevlar sections form the lower part of the assembled pole system. This places the protective construction around the principal area normally gripped and controlled by the operator.
Operator end
Report STD526000272
Tested evidence, not an unsupported claim
The test sample underwent a 35 kV power frequency withstand voltage test. The laboratory recorded no leakage current, flashover, breakdown, discharge, burn marks or obvious heating.
- 35 kV test voltage applied for one minute
- 0.0 mA leakage current recorded
- No flashover or electrical breakdown
- No discharge, burn marks or obvious heating after testing
- Appearance inspection passed
- Tested in accordance with DL/T 1476-2023
Independent test summary PASS
Maximum test voltage 35 kV 35,000 volts
Leakage current 0.0 mA
Duration 1 minute
Standard DL/T 1476-2023
Report STD526000272
Test sample construction Kevlar surface material over fibreglass
Transparent safety evidence
View the independent laboratory report
We believe professional users should be able to inspect the evidence behind our safety claims. The commercially sensitive manufacturer information has been redacted, while the laboratory identity, test standard, method and recorded results remain visible.
Independent test evidence Laboratory conclusion: PASS
Report number: STD526000272
Test standard: DL/T 1476-2023
Test voltage: 35 kV (35,000 VOLTS)
Leakage current: 0.0 mA
Test duration: 1 minute
Issue date: 20 January 2026
The report relates to the submitted three section, one metre laboratory test sample. Product kit contents and working lengths vary by individual listing.
The PDF preview may not display in every browser.
Open the full reportEssential safety information
Protective construction does not make working near live electricity safe
Kevlar insulated sections provide an additional protective measure. They must never replace a proper site assessment, safe working distances, suitable training or professional advice. Overhead power lines should always be treated as live and dangerous.
Professional pole systems
Reach gutters safely from ground level
Combine lightweight carbon pole construction with a powerful Cyclone gutter vacuum system to clear high level gutters without routine ladder access.
High reach pole systems
Build the working height needed for domestic and commercial gutter cleaning using modular pole sections.
Powerful Cyclone suction
Pair your pole kit with a professional Cyclone gutter vacuum system designed to remove leaves, moss and heavy debris.
Safety led specification
Two Kevlar protected lower sections are included with qualifying carbon pole kits rather than being treated as an optional extra.
Build your professional setup
Choose your poles. Choose your Cyclone.
Supporting safer pole work
Look up before any pole goes up
Equip2clean supports the Look Up Look Out safety message. Before assembling or raising gutter vacuum poles, inspect the full working area for overhead power lines and other electrical hazards.
Insulated equipment is an additional precaution, not a substitute for keeping a safe distance and stopping work when the risk is unclear.
Visit Look Up Look OutClear answers
Gutter pole safety testing questions
Understand what the laboratory result means and how the Kevlar sections are supplied with our pole kits.
View report STD526000272Which pole kits include the Kevlar sections? +
Qualifying Carbon Push Fit and Carbon Clamp Fit gutter vacuum pole kits include two Kevlar insulated lower sections as standard. Check the individual product listing for the precise contents of your chosen kit.
Where are the Kevlar sections positioned? +
They are used at the bottom, operator end of the assembled pole system. This is the principal area held and controlled during normal operation.
What does tested at 35 kV mean? +
The laboratory sample was subjected to a 35 kV power frequency withstand voltage test for one minute. The recorded leakage current was 0.0 mA and the sample experienced no flashover or breakdown under the stated test conditions.
Can I read the laboratory report? +
Yes. A redacted copy of report STD526000272 is embedded on this page and can also be opened as a full PDF. Commercially sensitive supplier details have been removed while the test information and results remain visible.
Does this make the pole safe near overhead electricity? +
No. The protective construction is an additional safety measure. It does not make working close to live electrical equipment safe and must never replace risk assessment, safe working distances or professional guidance.
Was the complete commercial pole kit tested? +
The laboratory report relates to the submitted three section, one metre test sample identified in report STD526000272. The customer pole kits include two Kevlar insulated lower operating sections as part of their supplied configuration.
Cyclone gutter vacuum systems
Professional gutter cleaning with protection built into the pole kit
Choose a high reach carbon pole system with two Kevlar insulated lower sections supplied as standard.
```
